| Products | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Properties | Standard | Typical Values |
|---|---|---|
| Yield Strength, N/mm2, min | 415 |
430-460 |
| Tensile Strength, N/mm2, min | 485 |
500-570 |
| Stress Ratio (TS/YS), min | 1.13 |
1.15-1.25 |
| Elongation | 14.5 |
14.5-20 |
Kanishk TMT Fe 500
| Properties | Standard | Typical Values |
|---|---|---|
| Yield Strength, N/mm2, min | 500 |
520-550 |
| Tensile Strength, N/mm2, min | 545 |
590-630 |
| Stress Ratio (TS/YS), min | 1.10 |
1.15-1.24 |
| Elongation | 12 |
12-15 |
Structural Steels
Structural Steels are available in the following sizes:
| Channels | 75 X 40, 100 X 50, 125 X 65, 150 X 75 mm. |
|---|---|
| I Beams | 100 X 60, 115 X 70, 125 X 70, 150 X 75 mm. IS HB 200 |
| H Beams | 125 X 65, 150 X 75 mm. |
| Angles | 50 X 6, 65 X 6 X 8 X 10, 75 X 6 X 8 X 10, 80 X 8 X 10, 90 X 6 X 8, 100 X 6 X 8 X 10 mm. |
| Round | Plain 6mm diameter to 120 mm diameter |
| Squares | 9 mm to 75 mm. |
| Flats | Upto 160 mm wide |
| TMT Bars | 8mm diameter to 25mm diameter |
| Profile | Any section or profile can be developed as per customer requirement |
 |
 |
||||||
|
||||||
 |
 |
 |
| © Copyright 2011. All rights reserved. Terms & Conditions | Privacy | Disclaimer | Site Map |
CONTACT: Old # 4 , New # 7, Thiru-Vi-Ka 3rd Street, Royapettah High Road, Mylapore, Chennai - 600 004. Phone No.: 42919700. Fax No.: 42919719. |
||